1000KG Heavy-Duty Electric Stabilizer Jack (Model: HH-400)

12V DC Electromechanical Chassis Stabilization Matrix | Engineered for RV Slide-Outs & Axle Support

The Model: HH-400 is an industrial-grade, low-profile electromechanical stabilizer jack engineered by HENGHONG (Zhejiang, China). Purpose-built to eliminate the tedious labor of manual scissor cranking, this 12V DC power jack is optimized for lateral and side-to-side stabilization on touring caravans, travel trailers, and heavy mobile platforms.

Engineered for versatility, the HH-400 serves as a premier turnkey solution for retrofitting and upgrading legacy manual chassis. It delivers a rigid 1000 kg (2,204 lbs) ultimate static holding capacity and a 540 kg (1,190 lbs) rated dynamic lifting threshold, making it highly effective for trailer axle stabilization and preventing catastrophic frame tilting during heavy slide-out extensions.

• Stabilization Capacity: 1000 kg Static Hold / 540 kg Dynamic Lift Envelope
• Extension Geometry: Full 504 mm (19.8 in) Vertical Stroke Travel
• Powertrain Specification: High-Torque 100W Low-Amp Motor Capsule (DC 12V Native)
• Application Spectrum: Chassis Retrofit, Axle Stabilization, and Expandable Slide-out Support

---

🛠️ Technical Overview & Retrofit Engineering Edge

Traditional consumer-grade scissor jacks frequently suffer from lateral sway under wind loads and rapid screw thread binding when exposed to road salt. The HENGHONG HH-400 directly mitigates these vulnerabilities by utilizing a reinforced steel link geometry paired with an enclosed, weather-sealed 100W electromechanical drive motor.

The precision-machined internal lead screw is protected by a heavy-duty, marine-grade Black Powder Coating that shields the steel from corrosion and grit buildup. With a substantial 504 mm vertical travel stroke, this stabilizer accommodates varied ground clearances without the need for unsafe wooden blocks. It provides a rock-solid, stable foundation that eliminates structural cabin rocking and prevents long-term stress on trailer slide-out seals and suspension bushings.

---

📊 Meticulous Technical Specifications

---

⚡ Key Engineering Features & Merchant Differentiators

• Dual Load Matrix Optimization: By explicitly separating the 540kg active dynamic lift threshold from the 1000kg static hold capability, this stabilizer offers engineers and fleet buyers transparent safety margins for mid-to-heavy touring trailers.
• Turnkey Retrofit Architecture: Specifically designed as a direct-fit upgrade for old manual stabilizer units. Caravan workshops and aftermarket dealerships can easily replace old hardware with this electric upgrade using standard mounting patterns.
• Multi-Point Stabilization Versatility: Moving past simple corner installation, the heavy-wall steel geometry allows the HH-400 to double as an active under-axle stabilizer or direct vertical support for heavy side-out expansions, stopping suspension compression and frame twisting.
• Low-Maintenance Power Efficiency: The specialized 100W gear-reduction motor delivers high lifting torque while drawing minimal current, preventing battery drainage during concurrent four-point stabilizer deployment.

---

🚛 Industrial Applications & Platform Compatibility

• Touring Caravans & Camper Vans: Upgrades standard manual corner jacks to smooth, automated electric operations.
• RV Slide-out Stabilization: Placed directly under slide-out frames to stop structural sagging and seal misalignment during long-term storage.
• Trailer Axle & Suspension Support: Lowers static stress on leaf springs and axles when heavy vehicles are parked for extended periods.
• Mobile Food & Utility Fleets: Provides a rock-solid, vibration-free platform for mobile kitchens, vending setups, and field service equipment.